DO200 Smart 

Parking Occupancy Sensor

The DO200 parking occupation detector is sensor which combining ultrasonic and magnetic technology. With the redundant technology of sensor, it achieves accuracy of 99%. The error is only happened while extreme environment, like flood and thunder at the same time. From the performance it overwhelms the lonely magnetic products.


Parking space occupancy monitoring

IP68 waterproof

Easy Installation & Integration

Ultrasonic+Magnetic Technology

Low power consumption

Accurate Measurement 

Network Diagram

With wireless module, it upload data to application server. Finally user can monitor the status remotely. 

It is applicable for smart parking application, parking bay booking and etc.



Dimension :113*84*55mm

Net weight : 140g
color : Black
Shellmateral : ABS
Principle : Accelerating detection
Accuracy rate :Canbeadjustedonline
MCU STM :32,32bitARM@ corecontroller

Frequency:NB-IoT: B3/B5/B8/B20/B28

                    LoRaWAN: CN470/EU868/AU915 /US915/AS923 

                     Sigfox: RCZ1,RCZ2,RCZ3,RCZ4
Internal battery : No rechargeable lithium battery ER26500 8000mAh@3.6VPower
Battery life : Morethan5years
Powerconsume : <120mA@3.6V(upload;<40ua@3.6V(sleep)
Operation temperature : -20~+70℃
Storage temperature : -40~+85℃
Protection level :IP68



(1) The sensor should be installed 1/3 of the entrance and exit, not the center of the parking space or near the non-entrance site. 

(2) The sensor should be installed at a distance of more than 1m from the adjacent parking space. Below this distance, excessive interference from neighboring vehicles will result in


Drill holes in the ground and place the sensor so that the surface of the sensor is1 cm below the surface of the parking space. Use expansion screws to fix the equipment. After installation, fill the space around the equipment. Note: Do not cover the ultrasonic probe of DO200 sensor, otherwise the ultrasonic measurement will be affected.